Vinaora Nivo SliderVinaora Nivo SliderVinaora Nivo SliderVinaora Nivo SliderVinaora Nivo SliderVinaora Nivo SliderVinaora Nivo SliderVinaora Nivo SliderVinaora Nivo SliderVinaora Nivo SliderVinaora Nivo SliderVinaora Nivo SliderVinaora Nivo SliderVinaora Nivo Slider

Hệ thống kiểm tra rò rỉ Taptone Force

 

Picture3Picture4

Standard Force w cans

 

CONTACT US FOR MORE INFORMATION 

 

Giới thiệu

Pressure Inspection up to 3.1 bar or 45 psi

Force technology detects leaks and low pressure in LN2 dosed containers, carbonated beverage containers and aerosol containers. Parallel belts transport the container past a sensor that measures the tension on the sidewall of the container. This action allows the system to measure the pressure inside the container. Utilizing DSP technology, the controller analyzes the measurement and assigns a merit value to each container. If the merit value is outside of the acceptable range, a reject signal activates a remote reject system and the container is removed from the line.

The TapTone Force sensor inspects 100% of containers at production line speeds. The system will detect leaks and low pressure in liquid nitrogen dosed containers and carbonated beverage containers. When combined with optional sensors, this system will also perform fill level inspection, cap inspection, and label detection

Tripod floor mount system replaces the standard floor and conveyor mounts and includes a 1.83m (6 ft) stainless steel pole which can be cut to suite conveyor heights up to 2.18m (86 in) based on a 0.76m (3 in) container.

A User Interface is required for operation of the Force sensor. The Force (F) sensor is compatilble with the T550 User Interface

Thông số kỹ thuật

SPECIFICATION DESCRIPTION
OPERATING SPEED ​up to 1.9 m/sec (375 ft/min) maximum
CONVEYOR HEIGHT up to 2.18m (86 in) based on 0.076 (3 in) container height
BELT OPENING ​177.8 mm (7 in) maximum
SHAFT ENCODER Aluminum
AC LINE VOLTAGE 230 VAC, 1 phase (standard) or 460 VAC, 3-phase (optional)
REJECT OUTPUTS 2
MATERIAL

Transport Deck: Aluminum hard coat

Frame Material: Stainless steel 

Wash Down:  Low-pressure water

Ứng dụng

LN2 dosed teas, juices, and water Over pressure/under pressure in LN2 dosed PET containers Retorted dairy drinks in cans Carbonated beer or soft drinks in cans or plastic bottles Other low to mid-range pressure applications up to 3.1 bar or 45 psi

  • 6262505039664873.jpg
  • Kido logo.jpg
  • Kinh Do.jpg
  • logo1.jpg
  • logo2.jpg
  • logo5.jpg
  • logo6.jpg
  • logo coca.jpg
  • Logo HV.jpg
  • logo interfood.jpg
  • logo KCVN.jpg
  • logo Unilever.jpg
  • Logo_Tribeco.jpg
  • pepsico.jpg
  • Sabeco.jpg
  • Sabmiller.jpg

Giới Thiệu

Công ty TNHH Thương Mại Dịch Vụ Kĩ Thuật Hoàng Vũ Được Thành lập năm 2002 hoạt động thiết bị, máy công nghiệp, tư vấn giải pháp và dịch vụ kỹ thuật.

Liên Hệ

42B Lê Trực, phường 7, quận Bình Thạnh, TP HCM.

Tel: 02 8 3512 5670 (04 lines)

Hot Line: 091 661 7376

Fax: 02 8 35 128 129

Email: info@hoangvumachinery.com

Site Map

Thống kê truy cập

1231422
Hôm nay
Hôm qua
Tuần này
Tháng này
Tất cả
253
329
1420
9588
1231422

Đăng nhập

Joomla Templates - by Joomlage.com